Samsung removed OEM unlocking one release before the Tab S9’s last upgrade
In July 2025, reports showed Samsung’s One UI 8 removing the option to unlock the bootloader on Galaxy phones and tablets in every region. We wanted to know what actually changed, so we took apart the bootloader from five official Galaxy Tab S9+ firmware builds.
In every 2026 build we examined, the check that decides whether to offer unlocking answers no for every device, and the code that read the owner’s choice is gone. The unlock screen is still in the file, unreachable. The code also indicates that a tablet unlocked under older firmware is relocked and erased the first time the new bootloader runs.
The timing matters. The Tab S9 family got One UI 8 in October 2025. This month it is getting One UI 9, the last major Android upgrade Samsung promised for it. The unlock disappeared one release before the upgrades ran out.
Security patches for the Tab S9 are due to end in 2028. After that, a tablet on One UI 8 or later has no supported software and no sanctioned way to install anything else. Samsung has not said why it made the change.
What was reported
Until One UI 8, Galaxy devices sold outside North America had an “OEM unlocking” switch in Developer options. The owner turned it on, confirmed in Download mode, and the device wiped itself and unlocked. US models had gone without that switch for years.
On July 26, 2025, SammyGuru reported that the switch was missing from stable One UI 8 on the Galaxy Z Fold 7 and Z Flip 7, and from the Galaxy S25 betas. Three details from that report and the firmware analysis behind it:
- The switch is hidden for everyone. A boot property,
ro.boot.other.locked, decides whether unlocking is offered. It had been set to block US models. In One UI 8 it is set to block every region. - The unlock logic is reported gone from the bootloader. A search of the One UI 8 bootloader found the unlock code stripped out at build time. Our own analysis, in the next section, finds this half right.
- It follows the update. SammyGuru says a device updated to One UI 8 cannot be unlocked. The developer who maintains the UN1CA unlock guide calls the change irreversible and says downgrading will not bring the option back.
Android Authority confirmed the missing switch on a non-US Galaxy Z Fold 7 the next day. 9to5Google and SamMobile reported the same.
Community trackers also say a device that was already unlocked is locked again when One UI 8 is flashed. That claim comes from user reports. Our reading of the 2026 bootloader, in the next section, supports it.
What we found in the bootloader
We compared the Android bootloader from five official Samsung firmware builds for the Galaxy Tab S9+ (SM-X810), dated August 2023 to September 2026, using Ghidra and Capstone. This is static analysis: we read the code Samsung shipped. We did not modify, patch or bypass anything, and nothing in this article unlocks a device.
Four things changed between the July 2025 build (X810XXS5CYG1, One UI 7, bootloader revision 5) and the February 2026 build (X810XXS6DZB6, One UI 8, revision 6). All four are still there in the two later builds we examined.
Revision 6 keeps the unlock code but closes every way an owner could reach it
Galaxy Tab S9+ (SM-X810) bootloader. Highlighted steps are the four code changes.
Before: bootloader revision 5
X810XXS5CYG1, One UI 7, July 2025
- 1. Owner turns on OEM unlockingA switch in Developer options. The choice is stored in the persistent partition.
- 2. Bootloader reads the settingAt the key-combo screen it loads the stored value and logs it.
- 3. Eligibility check decidesIf the unit qualifies, a long press opens the unlock confirmation screen.
- 4. Owner confirmsThe lock state is rewritten. The tablet reboots to recovery and erases user data.
- 5. Tablet boots unlockedThe owner can install another operating system. Verified boot reports ORANGE.
After: bootloader revision 6
X810XXS6DZB6 and later, One UI 8 onward, 2026
- 1. Switch hidden on every bootThe bootloader always passes other.locked=1 to Android. No region or device test decides it.
- 2. Setting reader removedThe code that loaded the stored value is gone. Nothing in the bootloader reads the setting.
- 3. Eligibility check always answers noThe function returns 0 for every unit. The unlock screen is still in the file, unreachable.
- 4. Locked state enforced at every bootThe state must match a Samsung-signed service token. No token: locked, and erased if unlocked.
- 5. Tablet stays lockedOnly Samsung-signed software boots. The owner has no step left to take.
- The eligibility check answers no for everyone. In the July 2025 build, a 72-instruction function weighs the unit and the stored setting and returns yes or no. In the 2026 builds the same function is 28 instructions long: it logs the lock state, then returns 0 for every device.
- Nothing reads the owner’s setting. The code that opened the
persistentpartition and read the “OEM unlocking” value is gone from the binary, along with its eight log messages. - Android is always told the device is locked down. Every 2026 build adds
androidboot.other.locked=1to the kernel command line as a fixed value. No region or device test decides it. The July 2025 build does not contain the string. Android exposes it asro.boot.other.locked, the property named in the press reports. - The locked state is enforced at every boot. The boot path now checks for a Samsung-signed service token and sets the lock state from it. With no token, the state is locked. If the tablet was unlocked, the code rewrites the state, queues a data wipe and reboots into recovery.
On revision 6, a tablet with no Samsung token is locked at every boot
Galaxy Tab S9+ builds X810XXS6DZB6, U6EZE3 and S6EZI2. Read from the code, not yet seen on hardware.
The fourth point is our reading of the code. We have not triggered it on a tablet, because doing so would relock and erase that unit for good.
Two things did not change. The unlock confirmation screen, its image and the function that writes the lock state are all still compiled in, with the same logic; their only caller now sits behind the check that always answers no. And the module that decides the verified boot state is byte-identical in all five builds, from August 2023 to September 2026.
What that adds up to:
- A Settings switch cannot bring unlocking back. The bootloader no longer reads the setting. Restoring owner unlock would take a new bootloader build from Samsung.
- The capability was switched off, not removed. This refines the public reporting, which said the unlock code had been stripped out. On the Tab S9+ the unlock code is still there. The gate in front of it is hard-wired to no.
- One route to an unlocked state remains, and Samsung holds it. The lock state can still be set by a Samsung-signed service token. We did not examine how those tokens are verified.
What we have not checked
- Other models. Our evidence covers the Tab S9+ on international firmware. We have not looked at the Tab S9, the Tab S9 Ultra or any phone. The wider claims in this article belong to the outlets we cite.
- The first One UI 8 builds. The October 2025 builds stayed on bootloader revision 5 and we have not examined them, so we cannot say first-hand which of the four changes arrived with the first One UI 8 release.
- One UI 9. We have not examined the November 2026 build.
- The relock on real hardware. We read it in the code and have not run it.
- The Android side. That Settings hides the switch when the property is set comes from the public reports.
- Samsung’s reasons. The code shows what was done, not why.
The timing
The unlock went away in the Tab S9’s third upgrade, and the fourth is its last.
Unlock path present in the 2025 build, closed in every 2026 build we examined
Galaxy Tab S9+ (SM-X810) firmware builds in order. Spacing is not to scale.
- Owner unlock path present
- Closed, lock enforced at boot
- Not examined by us
- Aug 2023X810XXU1AWHA, Android 13, bootloader rev 1Launch build. Owner unlock path present.
- Jul 2025X810XXS5CYG1, One UI 7, rev 5The last build we examined with the unlock path present.
- Oct 2025X810XXU5DYI5, U5DYJ1, S5DYJ2, One UI 8, still rev 5First One UI 8 builds. Not examined by us. Public reports say the switch was already gone.
- Feb 2026X810XXS6DZB6, One UI 8, rev 6Closed. All four code changes present.
- May 2026X810XXU6EZE3, Android 16, rev 6Closed. Same as DZB6.
- Sep 2026X810XXS6EZI2, Android 16, rev 6Closed. Same as DZB6.
- Nov 2026X810XXU6FZK2, One UI 9, rev 6The fourth and last promised Android upgrade. Not examined by us.
- 2028Security updates due to endAfter this: no supported software, and no owner unlock on revision 6.
- July 2023
- Samsung announces the Galaxy Tab S9, S9+ and S9 Ultra on Android 13, with four major Android upgrades and five years of security updates. SamMobile
- July 2, 2025
- Tab S9+ build X810XXS5CYG1 (One UI 7, bootloader revision 5): the last build we examined with the owner unlock path intact. Our analysis, Samfrew
- July 26, 2025
- First reports that One UI 8 (Android 16) removes the OEM unlocking option in every region. SammyGuru
- October 2025
- One UI 8 reaches the Tab S9 lineup, starting in South Korea on October 1. These first builds stay on bootloader revision 5, and we have not examined them. SamMobile, SamFirm
- February 13, 2026
- Tab S9+ build X810XXS6DZB6 (One UI 8, bootloader revision 6): the first build we examined with all four changes. Our analysis, Samfrew
- November 8, 2026
- One UI 9 (Android 17) build X810XXU6FZK2 is released for the Tab S9+ in South Korea: the fourth and final major upgrade. SamFirm, Samsung, Engadget
- 2028
- Security patches are due to end. Engadget
The bootloader revision is the digit after the S or U in the build number. It only goes up.
To be fair to Samsung, this is the support it promised in 2023. Four upgrades were promised and four are being delivered. Our complaint is about what was taken away along the way.
Newer tablets do better on paper. Engadget reports that the Tab S10 series and later get seven years of updates. On One UI 8 or later they have no unlock either, so a longer support window only postpones the same ending.
What Samsung has said
Nothing that we could find. Android Authority wrote in July 2025 that it would ask Samsung to confirm the change, and its article carries no reply. SammyGuru’s report has none either. We searched again on November 22, 2026 and found no public statement explaining the removal.
If Samsung has explained it somewhere, we want to read it and link it here.
What we think
Everything above is fact as best we can source it. This section is our opinion.
A lock you hold the key to protects you. A lock only the manufacturer can open protects the manufacturer. One UI 8 turned the first kind into the second, by software update, on devices people had already paid for.
Our analysis makes that concrete for the Tab S9+. The unlock screen is still in the bootloader. The module that verifies what boots has not changed by a single byte since 2023. What changed is who can reach the unlock: the owner’s path is closed in code, and the one that remains runs through a token only Samsung can sign.
We can’t see Samsung’s reasons and we won’t pretend to know them. We can see the effect. A Galaxy Tab S9 Ultra will still be a fast, capable computer in 2028. With an unlock, its owner could keep it going on Linux or a community Android build for years. Without one, it ages out on Samsung’s schedule. The owner loses an option, and the only party that gains is the one selling the replacement.
We think that’s a grift. It is also how working hardware becomes waste. The world generated 62 million tonnes of e-waste in 2022, and 22.3% of it was documented as properly collected and recycled, according to the Global E-waste Monitor 2024. A tablet that could have had a second life and is locked out of one adds to that pile.
You bought it. You should decide what it runs.
If you own a Galaxy device
- Read your build number before you update. Settings, About tablet, Software information shows it. On the Tab S9+, the letter fourth from the end is the Android generation: C or earlier means One UI 7 or earlier, where the unlock option should still exist outside North America. D or later means One UI 8 or later. X810XXS5CYG1 is One UI 7.
- Already unlocked? Do not install One UI 8 or later. Our reading of the 2026 Tab S9+ bootloader is that it relocks and erases an unlocked tablet at first boot. Community reports say the same of One UI 8 on other models.
- Know the trade. Reports say updating to One UI 8 or later removes the option for good. Staying on older firmware keeps it, at the cost of Samsung’s security patches. That is a real cost, and the choice is yours.
- Buying used, ask for the full build number first. The One UI version alone is not enough.
- Already on One UI 8 or later? There is no sanctioned way back, and the bootloader carries a rollback check against older firmware. We don’t offer workarounds and we don’t recommend the paid “unlock services” that circulate online.
- Tell Samsung. Owners are asking for the option back on Samsung’s own community forum. Add your voice.
What this means for our work
We run Linux on the Tab S9 family. All of it depends on the unlock Samsung used to provide.
We don’t break locks or exploit anything. A Tab S9+ on bootloader revision 6 is closed to us, and to its owner. That is also why the analysis in this article was read-only. We studied firmware Samsung published and changed nothing.
So we are putting our tablet work into hardware whose maker still lets the owner in.
Sources
Pages opened and read on November 22, 2026.
- Whitehat Research firmware analysis (November 22, 2026): five official Galaxy Tab S9+ bootloader builds compared with Ghidra and Capstone.
- SammyGuru: Samsung removes bootloader unlocking with One UI 8 (July 26, 2025): the original report and firmware details
- 9to5Google: One UI 8 seemingly removes bootloader unlock (July 26, 2025)
- Android Authority: Samsung may be killing bootloader unlocking with One UI 8 (July 27, 2025): confirmation on a non-US Z Fold 7, request for comment
- SamMobile: One UI 8 kills bootloader unlock (July 27, 2025)
- UN1CA: How to unlock your bootloader: the unlock procedure and the One UI 8 warning
- Bootloader unlock wall of shame: Samsung: community reports
- SamMobile: Galaxy Tab S9 update policy at launch (July 26, 2023)
- SamMobile: One UI 8 reaches the Galaxy Tab S9 (October 1, 2025)
- SamFirm: SM-X810 firmware builds: Android version, bootloader revision and release date per build, including X810XXU6FZK2
- Samfrew: SM-X810 firmware list: build dates, including X810XXS6DZB6
- Samsung Hong Kong: One UI 9.0 update notice (October 28, 2026): Tab S9 models scheduled for November 2026
- Engadget: These Samsung Galaxy tablets are in their last year of software support (October 17, 2026)
- ITU: The Global E-waste Monitor 2024